878 Royalty-Free Audio Tracks for "Low Sound"

Actually made with distorting, bitcrushing, and downsampling a recording of an electric drill (with this type of heavy processing the source material doesn't really matter much though). No chips or tunes were harmed in the making of this sound.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Heavy reverb and delay effects, low gain guitar. To the point type of licks but then some moody chords to finish it out. Probably best served up in smaller sections.

A short backpack shuffle. To be used as a person picking up a backpack, or shoulder bag. Made using a small satchel moving it randomly. (lol, apologies for the low grunt i made there. Way to ruin a sound. . . ).

Winding of a music box. Edited with audacity. Recorded on shock-mounted zoom h1 mic, record level 62, autogain off, gain low. Record location, inside a car in a single garage (great sound room).

A sound of an umbrella handle expanding and retracting, making clicking sounds. Great for foley and sound design. Recorded with a tascam tm-80 in a non sound proofed room, without an anti-pop filter. The umbrella was fairly close from the mic during recording. The post-processing was minor, just an eq to cut out some of the superfluous low frequencies. You can mention me if you like to, or give a link to the project containing this sound, but that's totally up to you.

A sound effect i've had sitting around for a while - i think i made it by growling and roaring into a mike and deepening the pitch. It sounds like an angry creature (a little like he's giving a warning). Thanks for listening, and be sure to follow me for more sound effects!. P. S. I request that all my sound effects only be used for clean, appropriate media and projects. Thanks!.

Switzerland, graubunden - at the surface of the lake, ice is melting and crisping…. Sound recorded by a ms setup schoeps microphone ccm41&ccm8;sound devices 552 mixer + sound devices 744t recordermicrophone are into a zephyx windscreen really close to the ice in this casems is encoded in stereo left-rightrecorded in 2011. More sounds on http://www. Felixblume. Com. Please rate the sound or comment it if you like it !.

Electric and noisy sound that evokes bad radio transmission or hard drive problem. It was created by the pressure of a iced tea bottle, which let a small air stream escape through the neck. (lot of noise cause the sound was really low). Zoom h5n + sgh6 mic.

A whistling sound. This sound would probably work best in edm or hip-hop songs. It's really cool-sounding. Feel free to use without attribution, however you want. This sound was created with groovepad.

Sound demo, played with modulation. You will hear every key. The registers (choires) are Viola, Violin and Horn. Note: Horn is the low pass filtered version of the register Trumpet, not an additional register! Data of instrument: Series 76 (Manufacturing year) No. 0131202 Manufactured by B. V. Eminent - Bodegraven - Holland

A kick drum produced for moody trance project. Production process: sound generated from kick synth; signal splitted in two bands; high band signal filtered, distorted and panned (this gives nice roughness and makes kick sound pretty good with center panned bassline); low band signal equalized with some re-verb; both bands mixed back together.

Basically layered a 200hz snare body, similar to a 909, low-passed and saturated. Added in a transient sound, then a certain impact sound that you wouldn't expect, layered together with some high end white noise, compressed, then used a transient shaper for that final touch.

This is an eerie sound made from recording my breathing with a whistle in my nose and then slowing it down and altering it quite a bit. Recorded and edited using audacity.

A typical summer soundscape on the bank of the ohio river in southern illinois. The low, drone of a huge barge can been heard. Also, the higher-frequency insects are also heard from time to time. Sound recorded on saturday july 28th, 2018 at 2:00pm using the sound devices 702 and the audio technica bp4025 stereo microphone.

An 8bit text blip, like you would see in an old visual novel. The sound is meant to play as text is being added on screen for a character speaking. Created for an upcoming visual novel/puzzle game called burden of proof.

Night vision turn on sound for video games. Made with rutgermuller's light switch sound https://freesound. Org/people/rutgermuller/sounds/51156/ and audacity generators and effects (three sine waves 1000hz/2000hz/4000hz, sliding pitch shift, fades, reverb, low pass filter, normalization in not that order and exact details i did forget).

Thunderstorm aftermath. Sounds of a thunderstorm about 10 minutes after it left the area. So low rumbles and rain dripping. The sound was recorded using a yamaha audiogram6 connected to a radioshack brand vocal microphone. Sampling was done at 44,100hz and the data was recorded using audacity. I recorded everything as a wav file and then uploaded it the same.

Sounds like the uplift to the drop of an edm track, but can also be used as a firework sound effect, or for a bomb dropping. Created using a low-passed square wave, over-compressing it, distorting it, playing 2 notes a semitone apart and pitch shifting.

06. 22. 16: a punch created from the sound of a leather glove being whipped, processed alongside a thickly-layered kick drum.

This sound was created by using the memo feature of my digital camera. It was recorded while standing under an overpass during a rain storm. If you listen carefully, you will hear traffic overhead and the rain pelting the ground nearby.

Dark growling drone sound i made on a my behringer model d analog synthesizer, recorded with effects in ableton live. Some processing was done later in adobe audition to finalize it.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Electric wood sander sanding a sheet of ply wood. Hard, loud and abrasive sound, high volume low pitch. Recorded inside a workshop with a zoom h6 recorder. Audio was post-processed to boost the audio. Wood sander was a bosch 230v.

Music box revolved on a 12" x 12" ceramic tile. Edited with audacity. Recorded on shock-mounted zoom h1 mic, record level 62, autogain off, gain low. Record location, inside a car in a single garage (great sound room).

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This is a series of sounds created for spitfire audio's make music day 2020 #spitfiremmd2020 it is a plastic drum, a springy pot rack and a big metal chip bin. There are both harmonic and enharmonic sounds here. The bin as a wonderful resonance and a lot of low end. This is a mono recording through a sennheiser 416 and an rme pre-amp. Enjoy!.

Akkords played without modulation. You can hear the warm and bright sound of this instrument. The registers (choires) are Viola, Violin and Horn. Note: Horn is the low pass filtered version of the register Trumpet, not an additional register! Data of instrument: Series 76 (Manufacturing year) No. 0131202 Manufactured by B. V. Eminent - Bodegraven - Holland

Tuned percussive sounddesign, made with a synth, a big reverb, an eq and a guitar amp. It is a bit more agressive than the previous one. You can use it for filmscore music, ambient. . .

A cool and very much slowed down guitar note, recorded not long before my guitar broke (it was old and it cracked). I accidentally made it and i thought it sounded cool i guessit can be used for a jarring moment or a suspenseful sound or something like that. Im sad rn (´。＿。｀).

Garden ambience: birds chirping in the background as well as the neighbours children playing in backyard in the distance. Recorded with the zoomh4n recorder with the built in stereo microphones. A low shelf was added to the sound to get rid of wind noises.

06. 22. 16: a punch created from the sound of a leather glove being whipped, processed alongside a thickly-layered kick drum.

A low-pitched ringing sound made via a high-pitched asian bell with a clear ringing tone, struck with a wooden dowel, the audio then subjected to a sequence of pitch-changes downward, each combined with a flanger-type effect at various settings for rate, depth and regeneration.

This was recorded at a home and hardware chain store. Along with the general ambiance, a recorded announcement comes over the speaker periodically, requesting that a qualified employee is needed in the "board-cutting area".

Sound of a ships sail being deployed quickly, or released into wind. Made to become one part for a harbour ambiance. Created by waving around the blanket of my bed. Recorded with focusrite scarlett and rode nt5. Slight reverb and some eq added (especially to enhance low frequencies).

Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

A recording of a backroom with the extractor fans running, the audio is low in pitch and can be used in instances like machinery rooms, all of my sounds come uncompressed or processed. This means there may be unwanted background noise/ sound that you can remove or not at your will. Equipment used:. Tascam dr40 w/ built in stereo microphone. File information:48,000hz24bit wavstereo.

Recording of me playing video games on my xbox controller. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This is a bass sound, not tuned but it is a perfect loop withouth clicks. It has no panning effect - i will do that on another sample. It is not tuned - use a program that tunes the samples to tonal. You must use it only in one octave from c5 to c6. In other octaves sounds not like a normal bass.

Recording in the cafeteria of pompeu fabra university (poblenou campus). A sound of a metal knife and fork is the main sound and in the background we can hear the typical sound of a cafeteria with a lot of people. It was in the lunch time and the sound have high frecuencies due to the metal contact and middle-low frecuencies due to people talking.

This is one of the soundtrack cues that i completed for a psychological thriller, short. . . . . The director cut all music but liked it- it is a good piece for background to smooth out visual and dialogue for a darker genre.

Recorded using a canon gl1 and an audiotechnica shotgun mic(unsure of model number, a cheap one i'm sure). The sound of a finepoint pen scribbling on the hard cardboard of the back of a notebook. The audio is low so the gain might need to be adjusted. My professorliked this one.

Sound design elementskick effect,is perfect for drum machine,cinematic uses,video games. Effects recorded from the field. Recording gear-zoom h6 and microphone - røde ntg5reaper daw - audio processing.

Mechanical synth swell fx pad. Kinda dark undertones with a bit of distortion. Licence: cc 0.

Created this sample using only audacity. I started off by generating a square wave chirp between 10000 and 20000 hz on a mono track, copied this created a stereo track and messed around with timestretching and low pass filtering until i got the desired sound.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.